![]() ![]() The image on your projector might appear unclear due to a few different reasons. If the projector still won’t display, contact DBpower customer service for help.Check lamp status by checking the button on top of the projector.Place the projector near a cooler surface to avoid overheating.Make sure all power cords are plugged in properly.Try adjusting the cables so they are seated better.Wait 30 seconds before reinserting the battery or reconnecting the device.Or, if using a laptop, remove its battery.Unplug the power cord from the projector and computer.If there are still issues with the light indicator blinking after you change modes, make sure to follow the steps below: ![]() Make sure to use HDMI or AV to connect your device and follow instructions for each input mode. If your DBpower projector’s light indicator blinks but there is no image, this could mean that you are not using the correct input mode. Light on the projector is blinking, but the picture won’t project ![]() In this case, try using AC power to charge the projector so it can start up properly. When we try to connect our DBpower Projector to our computers through USB power, the device may not fully charge or may not work at all. This can also be helpful if your device was cut off but is still connected to your computer, so it’s important always to keep the wire and battery removed when not in use. However, if your device is still active and the light won’t shut off, try resetting your DBpower projector by taking out the battery. When using our DBpower Projector, the power light should automatically turn off when idle for a few minutes to save battery life. You can also try the keystone option to move parts of the image up and down to fit properly. It may also be helpful to turn on “resize” and change the settings, so it fits better with your screen. If parts of the picture are cut off when projecting onto a screen, make sure that your projector is set for the correct aspect ratio. You may also like PVO projector troubleshooting, Topvision projector troubleshooting, Jinhoo projector troubleshooting. It may also be possible that your device isn’t powered by USB, which might cause it not to work. Make sure that your projector is set up to turn on with a connection automatically and that you’re using the correct audio source. This can be because of settings in both devices, which need to be changed so they can work together. Using our DBpower Projector may not always automatically turn on when we connect our devices to it. The projector won’t automatically turn on with the device If there are still issues with connectivity, try resetting the projector and make sure that you use a stable, strong connection. Make sure that it is set so it won’t go to sleep in the middle of using it. The projector may be set to “sleep” after not being used for a while to save power, but this can cause problems with the connection. When we encounter problems connecting our DBpower Projector to our devices, we should check the settings for both devices. The projector won’t connect or go to sleep It is also possible for your projector to freeze due to a problem with the software, so take out the connection wire and battery before trying again. If this problem continues, try turning off autoplay for your uploaded files and ensuring that you don’t have any downloads in the background. If a video on your DBpower Projector takes a long time to load, make sure that your Wi-Fi is working properly and there are no problems with downloads or updates on your device. It may also be possible that the projector is set up to play another audio source instead of the one you want. If you don’t hear any audio when watching a video, try switching audio sources on your device. ![]()
0 Comments
Leave a Reply. |